-
Goff Hauser posted an update 10 hours, 59 minutes ago
5. Environmental impact assessment indicates that the proposed recycling route allows remarkable reduction of global warming and toxicity impacts compared with metal production from virgin mining and reference processes. We further unveiled the applicability of the electrodeposition technique in the context of anthropogenic mineral recycling, emphasizing resource sustainability and cleaner production.Quaternary nonlinear optical single crystals AgxGaxGe1-xSe2 (x = 0.250, 0.167) were grown by the Bridgman method in a four-zone furnace. The thermal expansion behavior of AgxGaxGe1-xSe2 (x = 0.25, 0.167) was studied by the method of single-crystal X-ray diffraction from 150 to 295 K and powder X-ray diffraction in the range of 298-773 K. Both results show the crystals have positive linear thermal expansion coefficients in different directions and a positive volume thermal expansion coefficient, and it is observed that they satisfy the relationship of αa > αc > αb and αV ≈ αa + αb + αc for the orthorhombic structure. It is found that the AgxGaxGe1-xSe2 (x = 0.25, 0.167) unit cells varying with temperature were mainly dominated by variations in framework geometry (AgSe4 tetrahedron), and the thermal motion of Ag atoms in the AgSe4 tetrahedron. As it was revealed, according to the powder X-ray diffraction, it is found that the isotropic thermal atomic displacement parameter of the Ag atoms is much larger than those of the Se and Ga(Ge) atoms in the AgSe4 tetrahedron. Furthermore, anisotropic atomic displacement parameters (ADPs) of Ag atoms are extracted from the single-crystal diffraction; the ADPs along the a axis, b axis, and c axis have a significant difference, which means the thermal vibration of Ag atoms is anisotropic. It is of great significance for improving crystal growth technology and understanding the thermal properties of this kind of crystals.Copper-based sulfides are promising materials for thermoelectric applications, which can convert waste heat into electricity. This study reports the enhanced thermoelectric performance of Cu26V2Ge6S32 colusite via substitution of antimony (Sb) for germanium (Ge) and introduction of copper (Cu) as an interstitial atom. N6022 manufacturer The crystal structure of the solid solutions and Cu-rich compounds were analyzed by powder X-ray diffraction and scanning transmission electron microscopy. Both chemical approaches decrease the hole carrier concentration, which leads to a reduction in the electronic thermal conductivity while keeping the thermoelectric power factor at a high value. Furthermore, the interstitial Cu atoms act as phonon scatterers, thereby decreasing the lattice thermal conductivity. The combined effects increase the dimensionless thermoelectric figure of merit ZT from 0.3 (Cu26V2Ge6S32) to 0.8 (Cu29V2Ge5SbS32) at 673 K.New neutral iridium(III) complexes featuring a cubic polyhedral oligomeric silsesquioxane (POSS) unit, [Ir(N∧C)2(L1-POSS)] [HN∧C = 2-phenylpyridine (Hppy; 1), 2-phenylbenzothioazole (Hbt; 2), and 2-(1-naphthyl)benzothiazole (Hbsn; 3); L1-POSS = (E)-4-[(2-hydroxybenzylidene)amino]benzyl 3-heptakis(isobutyl)POSS-propyl carbamate], were designed and synthesized. Their POSS-free counterparts, [Ir(N∧C)2(L1)] [L1 = (E)-N-(4-hydroxymethylphenyl)-1-(2-hydroxyphenyl)methanimine; HN∧C = Hppy (1a), Hbt (2a), and Hbsn (3a)], and the poly(ethylene glycol) (PEG) derivatives [Ir(N∧C)2(L1-PEG)] [L1-PEG = (E)-4-[(2-hydroxybenzylidene)amino]benzyl 3-[2-[ω-methoxypoly(1-oxapropyl)]ethyl]carbamate; HN∧C = Hppy (1b), Hbt (2b), and Hbsn (3b)] were also prepared. The photophysical, photochemical, and biological properties of the POSS complexes were compared with those of their POSS-free and PEG-modified counterparts. Upon irradiation, all of these complexes displayed orange-to-red emission and long emission lifetimes under ambient hways of these complexes were also investigated. This work not only offers promising luminescent probes for lipid droplets through the structural modification of iridium(III) complexes but also paves the way to the construction of new reagents for theranostics.Minimum and zero liquid discharge (MLD/ZLD) are emerging brine management strategies that attract heightened attention. Although conventional reverse osmosis (RO) can improve the energy efficiency of MLD/ZLD processes, its application is limited by the maximum hydraulic pressure (ΔPmax) that can be applied in current membrane modules. To overcome such limitation, novel RO-based technologies, including osmotically assisted RO (OARO) and low-salt-rejection RO (LSRRO), have been proposed. Herein, we utilize process modeling to systematically compare the energy consumption of OARO and LSRRO for MLD/ZLD applications. Our modeling results show that the specific energy consumption (SEC) of LSRRO is lower (by up to ∼30%) than that of OARO for concentrating moderately saline feed waters (∼70,000 mg/L TDS). However, by implementing more stages and/or an elevated ΔPmax, LSRRO has the potential to outperform OARO energetically for treating high-salinity feed waters. Notably, the SEC of both OARO and LSRRO could be 50% lower than that of mechanical vapor compressor, the commonly used brine concentrator in MLD/ZLD applications. We conclude with a discussion on the practicability of OARO and LSRRO based on membrane module availability and capital cost, suggesting that LSRRO could potentially be more feasible than OARO.It is of great significance to disclose the diverse aging pathways for polymers under multiple factors, so as to predict and control the potential aging evolution. However, the current methods fail to distinguish multiple pathways (multi-paths) of polymer aging due to the lack of spatiotemporal resolution. In this work, using polyimide as a model polymer, the hydroxyl, carboxyl, and amino groups from the polyimide aging process were labeled using specific fluorescent probes through boron-oxygen, imine, and thiourea linkages, respectively. When the excitation and emission wavelengths of each fluorescent probe were controlled, the multi-paths in polyimide aging can be visualized individually and simultaneously in three-dimensional fluorescent images. The overall aging process under hydrothermal treatment was destructured into the pyrolysis and hydrolysis pathways. Three-dimensional dynamic studies discovered that the increased humidity, along with the decreased oxygen content, could hamper the pyrolysis reaction and accelerate the hydrolysis reaction, leading to severe degradation of the overall polyimide aging.